Descripción
Buying more than one? Ask for a volume price. Shop prices are per unit. For several sensors, multiple sites or a full rollout we quote a project price with installation, licences and support included, and the per-unit price comes down with volume. Request a volume quote or write to sales@vemcogroup.com.
Delivered with Vemco firmware. Milesight VS133, delivered as NF133 with Vemco firmware. Every unit ships with Vemco firmware, stress tested by Vemco's own security team, and connects to Vemcount and VemSpace out of the box with remote setup and calibration support.
Software: 60-day free trial on the Vemco platform. The hardware price does not include the software licence. Vemcount and VemSpace are licensed directly on the Vemco platform with a 60-day free trial; plans and prices at vemcogroup.com/products/pricing.
The Milesight VS133 is a Time-of-Flight (ToF) people counter for store entrances and passages up to 3.5 m. It counts people in and out from a depth map with up to 99.8% accuracy, so no images of people are captured, and it tells adults, children and staff apart. Choose PoE for wired sites or LoRaWAN for wireless ones, in black or white.
Key features
- Up to 99.8% accuracy with second-generation ToF and AI; measuring accuracy under 3.5 cm.
- 98° x 80° field of view, 940 nm invisible light beam, detection range 0.5 to 3.5 m, installation height up to 3.5 m.
- Multiple counting lines, U-turn filtering, bi-directional counting, regional counting, dwell time, heat map.
- Children and adult differentiation, staff detection with the VA31 lanyard.
- PoE version with Ethernet, HTTP, MQTT, CGI, DI and DO and multi-device stitching; LoRaWAN version for wireless sites.
- Local storage of 4 GB and data retransmission; IP40 for indoor use.
Works with
Vemcount for footfall and conversion and VemSpace for occupancy. Accessories: VB01 multifunctional bracket for lintel mounting, VA31 staff lanyard. LoRaWAN version: UG65 gateway. For mounting above 3.5 m see the VS135 high ceiling version.
Replacing an existing counter?
The VS133 replaces thermal counters (Irisys Gazelle and Vector) and older ToF units one to one at standard store entrances, with a wider view than most thermal sensors. Vemco handles the migration of your historical data. Ask about a replacement project.
How it compares
| Technology | In this shop | Privacy | Mounting height | Light conditions | Best for |
|---|---|---|---|---|---|
| Time-of-Flight (ToF) | Milesight VS133, VS135 | Depth map only, no images | Up to 3.5 m; 6.5 m on the VS135 high ceiling version | Own infrared light, works in darkness | Store entrances where privacy matters |
| 3D stereo vision | Milesight VS125, Xovis PC2SE, Xovis PF-L | Images processed on the sensor, only counts are sent | About 2 to 6 m, higher with the Xovis PC3SE | Needs some light; the VS125 adds infrared | Busy and wide entrances, groups, children and demographics |
| Thermal | Older installed counters | Heat image, no identifiable images | Low to medium ceilings | Independent of light, affected by warm air and sunlight | Legacy sites being replaced |
| Dual PIR | Milesight VS350 | No images | Around 3 m, ceiling or wall | Independent of light | Fitting rooms, restrooms, narrow passages |
| 2D AI camera | TD Intelligence TD1001, VC-2D | Images processed on the device | About 2.3 to 5 m | Needs normal indoor light | Low traffic sites, age and gender analytics |
Planning the installation
Mount the VS133 centred over the entrance and pointing straight down, no higher than 3.5 m, or on the lintel with the VB01 bracket where the ceiling is too high. The mistakes we see most often are mounting above the rated height, mounting off-centre so part of the doorway falls outside the view, and fixing the sensor where a door closer, sign or display blocks it. For PoE keep the cable run under 100 m; for LoRaWAN check gateway coverage first. After mounting, Vemco sets the counting line and validates the counts with the remote calibration and validation service.
Frequently asked questions
Does the Milesight VS133 capture images?
No. It counts from a Time-of-Flight depth map, so no images of people are captured or stored.
VS133 or VS135?
Both use ToF. The VS133 is the indoor store-entrance model (IP40, up to 3.5 m, PoE or LoRaWAN). The VS135 adds IP65 for semi-outdoor entrances, 4G, radar sleep mode and a high ceiling version up to 6.5 m.
Can the VS133 replace my Irisys counter?
Yes, at standard store entrances it replaces Irisys Gazelle and Vector units one to one, and Vemco migrates your historical counts.
How do I stop staff being counted?
Staff wear the VA31 lanyard and are excluded from the visitor count automatically.
Do I need a software licence?
Yes. Counts are shown in Vemcount, which is licensed on the Vemco platform with a 60-day free trial.
Ideal applications: retail store entrances, supermarkets, showrooms, libraries, offices.